Fluke 83-5 Industrial Digital Multimeter

$298.00 $149.00

1000 in stock

Fluke 83-5 Industrial Digital Multimeter Description

The Fluke 83 Series V Industrial Digital Multimeter is an average responding-RMS indicating digital multimeter (also known as a multitester) for measuring AC/DC voltage up to 1,000V, AC/DC current to 10 amp (20 amp for a maximum of 30 seconds), frequency to 200KHz, resistance to 50 megaohms, and capacitance to 9,999 microfarads and includes continuity and diode tests. The 6,000-count resolution, 3-3/4 digit digital display is backlit for readability in low-light conditions and includes an analog bar graph which updates 40 times per second which is useful for making peak and null adjustments and for observing rapidly changing inputs. The meter has Min./Max.-Average recording as well as a Min./Max. Alert to automatically capture variations. A duty cycle indicates the percentage of time a signal is above or below the trigger level during one cycle and a peak capture function detects intermittent problems and transients as low as 250 microseconds. The meter has both manual- and auto-ranging modes for user flexibility and a hold function to capture readings. This meter is safety rated for Category III up to 1,000V and Category IV up to 600V and can withstand hazardous volt spikes in excess of 8,000V to reduce risks of spikes and surges caused by load switching and faults on industrial circuits. It uses a 9V battery (installed) that has a battery life of approximately 400 hours without backlight and has a selectable sleep mode to maximize battery life. The meter measures 18.6 x 8.6 x 3.1 cm (H x W x D) and weighs 22 oz./624 g. (H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) This meter includes a removable holster with built-in test lead and probe storage. Multimeters are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multimeters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multimeters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltage. Safety ratings are based on International Electrotechnical Commission (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.What’s in the Box?Model 83 multimeterTest leadsAlligator clipsHolster9V battery (installed)

Fluke 83-5 Industrial Digital Multimeter how to buy

On the site involving Discount Sales you can find catalogs connected with product, it is possible to only pick the Fluke 83-5 Industrial Digital Multimeter you enjoy and place a great order. Quite soon the supervisor will get in touch with you and answer your questions concerning Fluke 83-5 Industrial Digital Multimeter.

We all guarantee services at a advanced and are all set to give you in depth advice.


There are no reviews yet.

Be the first to review “Fluke 83-5 Industrial Digital Multimeter”

Your email address will not be published. Required fields are marked *